Your browser does not support scripting. You may encounter some problems viewing data on this site. Support Login
 
SafeSubscribe
Online Store Uniden Products Customer Service About Uniden News

Product Support  
Find an Answer   Support Home |  Send an Email |  My UNIDEN

Basic Troubleshooting Steps for Cordless phones

Question:

What are things that I can check or do to get my phone working properly?


Answer:

  1. Make sure phone is not sharing an ac outlet with any other types of electronic equipment. 
  2. Make sure base ac adapter is not sharing a multi outlet plug.
  3. Make sure phone cord is not plugged into a splitter, fax, computer or remote answering machine.
  4. Check to see if the phone cord is plugged in properly.
  5. Check to see if the AC Adapter has been properly plugged in, the outlet is on and working. 
  6. Make sure phone jack is working.
  7. Phone cord needs to be plugged directly into phone jack to insure optimal performance. 
  8. Make sure you are using the original ac adapter that came with the unit. (It should say Uniden on it)
  9. Make sure proper battery is being used .(It should be the one that came with the unit, or a new Uniden battery)
  10. Make sure battery is installed and plugged in all the way.( It should click in) 
  11. Move phone to a different location in the home. (Different phone jack)
  12. Disconnect AC Adapter and reconnect it After 25 seconds.
  13. Reset the Digital Security Code if applicable - instructions can be found in owner's manual if applicable
  14. If nothing else has worked.  You can see if a basic reset will work on the phone. A reset is done by following the below steps:
    a. Disconnect Battery from handset(s)
    b. Disconnect Phone Cord from wall jack
    c. Disconnect Phone cord from base unit
    d. Disconnect AC adapter from wall outlet
    e. Allow to sit for 30 min
    f. Reconnect Phone Cord to base
    g. Reconnect Phone cord to wall jack
    h. Reconnect AC Adapter to wall outlet
    i. Reconnect Battery to handset until you click or feel the plug snap into place
    j. Re-Register Handset by placing on main base (Resetting security code - manually)
  15. Check to see if you are on tone dialing or pulse dialing.
  16. If you are still experiencing problems please call customer service at 1-800-297-1023,  please tell them that a basic system reset has already been completed and what the issues are still. 

 

 

 
Powered By
Item ID:
114
Last Reviewed:

03/28/2006 04:35 PM

Product:
Cordless Phones
Model:
DCX700
 
Was this helpful?
Yes
Somewhat
No

Email this issue to a friend E-mail
Print this issue Print
 
   Uniden America : Home | Online Store | Products | Customer Service | About Uniden | News | Sitemap | Accessibility
   Uniden Global : USA | Japan | Australia | New Zealand
   Terms & Conditions | Privacy Policy | Preferred Customer Program
   © Uniden America Corporation